$7.41 + VAT
B401 System Sensor Plug-In Detector Base
SKU: B401Specifications
- Base Diameter: 10.2 cm (4.0 inches)
- Base Height: 2.0 cm (0.8 inches)
- Weight: 152 g (0.34 lb.)
- Mounting: 50 mm box 60 mm box Operating
- Temperature Range: –10° to +60°C (14° to 140°F) — European Installation 0° to 49°C (32° to 120°F) — US/Australian Installation Operating Humidity
- Range: 10% to 93% Relative Humidity
$18.53 + VAT
EC01003 System Sensor Conventional Optical Smoke Detector
SKU: EC01003-
Conventional optical smoke detector, automatic drift compensation, voltage 8-30VDC/ current 0,05mA quiescent and 80mA in alarm, IP43 when installed on WB-1 shroud, -30° to 70°C, certificate 0832-CPD-0064
$18.53 + VAT
RA100Z System Sensor Remote Annunciator
SKU: RA100ZRA100Z remote annunciator is designed for both conventional and intelligent applications.
$18.53 + VAT
ECO1002 System Sensor Conventional Multi-Sensor Detector – Smoke & Heat
SKU: ECO1002- Low profile design
- Low current draw
- Automatic drift compensation
- Operates on 12 and 24VDC Systems
- Remote alarm test feature
- Easy Maintenance
- Range of detector bases available
- Remote LED Option
- Approved to EN54 – 7:2000 (Amendment 1)
- EN54 – 5:2000 (Amendment 1) Class A1R; CEA 4021
$27.78 + VAT
System Sensor Metal SaMPling Tube, 8 Ft. To 12 Ft. Width
SKU: DST10Duct smoke detector accessories add functionality to the duct smoke detection system by allowing quick, convenient inspections at eye level and effective audible and visible notification options.
$74.08 + VAT
BEAMMMK System Sensor Mounting Kit
SKU: BEAMMMK- The BEAMMMK allows reflected beam detectors and reflectors to be mounted to either a vertical wall or the ceiling. The kit allows for additional alignment range in cases where the detector and reflector cannot be mounted within 10 degree of each other. The kit includes the hardware necessary to mount either a single transmitter/receiver unit or a single reflector. (To mount the transmitter/ receiver the surface mount kit, BEAMSMK, must also be used). If the transmitter/receiver and the reflector require additional alignment range two kits are required.
$108.34 + VAT
CO1224TR System Sensor Carbon Monoxide Detector
SKU: CO1224TR- A 10-year end-of-life timer
- RealTest® enables a functional test using canned CO
- A code-required trouble relay
- Wiring supervision with SEMS terminals
- 12/24 VDC
- A low current draw of 20 mA in standby and 40 mA in alarm
- Versatile mounting for wall and ceiling
- Accurate and reliable electrochemical sensing technology
- Optional CO-PLATE CO Detector Replacement Plate to upgrade previously installed competitor detectors to the CO1224T or CO1224A.
- CO1224T tested up to 12,000 feet above sea level
$132.41 + VAT
System Sensor D2 Duct Smoke Detector, 2-WIRe, Photoelectric
SKU: D2- Photoelectric, integrated low-flow technology
- Air velocity rating from 100 ft/min to 4,000 ft/min (0.5 m/s to 20.32 m/sec)
- Versatile mounting options in square or rectangular configuration with modular construction
- Plug-in sensor
- Superb false immunity with the latest sensor technology
- Broader ranges for operating temperature (-4ºF to 158ºF) and humidity (0% to 95% non-condensing)
- Patented sampling tube installs from front or back of the detector with no tools required
- A cover tamperture to indicate a trouble condition for removed or improperly installed sensor cover
- Increased wiring space with a newly added 3/4 inch conduit knockout
- Improved LED status
- 24 V DC
- Backward compatibility with existing Innovair products, inclremote accessories
$138.89 + VAT
System Sensor Dnre Smoke Detector
SKU: DNRE- Photoelectric, integrated low-flow technology
- Air velocity rating from 0.5m/s to 20.32m/sec
- Versatile mounting options: square or rectangular configuration
- Broad ranges for operating temperature −20°C to 70°C and humidity (0% to 95% non-condensing)
- Patented sampling tube installs from front or back of the detector with no tools required
- New Cover tamper signal
- Increased wiring space with a newly added 20mm conduit knockout
- Available space within housing to accommodate mounting of relay module
- Clear cover for convenient visual inspection
$416.68 + VAT
BEAMLRK System Sensor Long Range Kit
SKU: BEAMLRKThe BEAMLRK allows reflected beam detectors to be installed at separations between 230 and 328 feet (70 to 100 meters).
B401 System Sensor Plug-In Detector Base
Specifications
- Base Diameter: 10.2 cm (4.0 inches)
- Base Height: 2.0 cm (0.8 inches)
- Weight: 152 g (0.34 lb.)
- Mounting: 50 mm box 60 mm box Operating
- Temperature Range: –10° to +60°C (14° to 140°F) — European Installation 0° to 49°C (32° to 120°F) — US/Australian Installation Operating Humidity
- Range: 10% to 93% Relative Humidity
EC01003 System Sensor Conventional Optical Smoke Detector
-
Conventional optical smoke detector, automatic drift compensation, voltage 8-30VDC/ current 0,05mA quiescent and 80mA in alarm, IP43 when installed on WB-1 shroud, -30° to 70°C, certificate 0832-CPD-0064
RA100Z System Sensor Remote Annunciator
RA100Z remote annunciator is designed for both conventional and intelligent applications.
ECO1002 System Sensor Conventional Multi-Sensor Detector – Smoke & Heat
- Low profile design
- Low current draw
- Automatic drift compensation
- Operates on 12 and 24VDC Systems
- Remote alarm test feature
- Easy Maintenance
- Range of detector bases available
- Remote LED Option
- Approved to EN54 – 7:2000 (Amendment 1)
- EN54 – 5:2000 (Amendment 1) Class A1R; CEA 4021
System Sensor Metal SaMPling Tube, 8 Ft. To 12 Ft. Width
Duct smoke detector accessories add functionality to the duct smoke detection system by allowing quick, convenient inspections at eye level and effective audible and visible notification options.
BEAMMMK System Sensor Mounting Kit
- The BEAMMMK allows reflected beam detectors and reflectors to be mounted to either a vertical wall or the ceiling. The kit allows for additional alignment range in cases where the detector and reflector cannot be mounted within 10 degree of each other. The kit includes the hardware necessary to mount either a single transmitter/receiver unit or a single reflector. (To mount the transmitter/ receiver the surface mount kit, BEAMSMK, must also be used). If the transmitter/receiver and the reflector require additional alignment range two kits are required.
CO1224TR System Sensor Carbon Monoxide Detector
- A 10-year end-of-life timer
- RealTest® enables a functional test using canned CO
- A code-required trouble relay
- Wiring supervision with SEMS terminals
- 12/24 VDC
- A low current draw of 20 mA in standby and 40 mA in alarm
- Versatile mounting for wall and ceiling
- Accurate and reliable electrochemical sensing technology
- Optional CO-PLATE CO Detector Replacement Plate to upgrade previously installed competitor detectors to the CO1224T or CO1224A.
- CO1224T tested up to 12,000 feet above sea level
System Sensor D2 Duct Smoke Detector, 2-WIRe, Photoelectric
- Photoelectric, integrated low-flow technology
- Air velocity rating from 100 ft/min to 4,000 ft/min (0.5 m/s to 20.32 m/sec)
- Versatile mounting options in square or rectangular configuration with modular construction
- Plug-in sensor
- Superb false immunity with the latest sensor technology
- Broader ranges for operating temperature (-4ºF to 158ºF) and humidity (0% to 95% non-condensing)
- Patented sampling tube installs from front or back of the detector with no tools required
- A cover tamperture to indicate a trouble condition for removed or improperly installed sensor cover
- Increased wiring space with a newly added 3/4 inch conduit knockout
- Improved LED status
- 24 V DC
- Backward compatibility with existing Innovair products, inclremote accessories
System Sensor Dnre Smoke Detector
- Photoelectric, integrated low-flow technology
- Air velocity rating from 0.5m/s to 20.32m/sec
- Versatile mounting options: square or rectangular configuration
- Broad ranges for operating temperature −20°C to 70°C and humidity (0% to 95% non-condensing)
- Patented sampling tube installs from front or back of the detector with no tools required
- New Cover tamper signal
- Increased wiring space with a newly added 20mm conduit knockout
- Available space within housing to accommodate mounting of relay module
- Clear cover for convenient visual inspection
BEAMLRK System Sensor Long Range Kit
The BEAMLRK allows reflected beam detectors to be installed at separations between 230 and 328 feet (70 to 100 meters).
B401 System Sensor Plug-In Detector Base
Specifications
- Base Diameter: 10.2 cm (4.0 inches)
- Base Height: 2.0 cm (0.8 inches)
- Weight: 152 g (0.34 lb.)
- Mounting: 50 mm box 60 mm box Operating
- Temperature Range: –10° to +60°C (14° to 140°F) — European Installation 0° to 49°C (32° to 120°F) — US/Australian Installation Operating Humidity
- Range: 10% to 93% Relative Humidity
EC01003 System Sensor Conventional Optical Smoke Detector
-
Conventional optical smoke detector, automatic drift compensation, voltage 8-30VDC/ current 0,05mA quiescent and 80mA in alarm, IP43 when installed on WB-1 shroud, -30° to 70°C, certificate 0832-CPD-0064
RA100Z System Sensor Remote Annunciator
RA100Z remote annunciator is designed for both conventional and intelligent applications.
ECO1002 System Sensor Conventional Multi-Sensor Detector – Smoke & Heat
- Low profile design
- Low current draw
- Automatic drift compensation
- Operates on 12 and 24VDC Systems
- Remote alarm test feature
- Easy Maintenance
- Range of detector bases available
- Remote LED Option
- Approved to EN54 – 7:2000 (Amendment 1)
- EN54 – 5:2000 (Amendment 1) Class A1R; CEA 4021
System Sensor Metal SaMPling Tube, 8 Ft. To 12 Ft. Width
Duct smoke detector accessories add functionality to the duct smoke detection system by allowing quick, convenient inspections at eye level and effective audible and visible notification options.
BEAMMMK System Sensor Mounting Kit
- The BEAMMMK allows reflected beam detectors and reflectors to be mounted to either a vertical wall or the ceiling. The kit allows for additional alignment range in cases where the detector and reflector cannot be mounted within 10 degree of each other. The kit includes the hardware necessary to mount either a single transmitter/receiver unit or a single reflector. (To mount the transmitter/ receiver the surface mount kit, BEAMSMK, must also be used). If the transmitter/receiver and the reflector require additional alignment range two kits are required.
CO1224TR System Sensor Carbon Monoxide Detector
- A 10-year end-of-life timer
- RealTest® enables a functional test using canned CO
- A code-required trouble relay
- Wiring supervision with SEMS terminals
- 12/24 VDC
- A low current draw of 20 mA in standby and 40 mA in alarm
- Versatile mounting for wall and ceiling
- Accurate and reliable electrochemical sensing technology
- Optional CO-PLATE CO Detector Replacement Plate to upgrade previously installed competitor detectors to the CO1224T or CO1224A.
- CO1224T tested up to 12,000 feet above sea level
System Sensor D2 Duct Smoke Detector, 2-WIRe, Photoelectric
- Photoelectric, integrated low-flow technology
- Air velocity rating from 100 ft/min to 4,000 ft/min (0.5 m/s to 20.32 m/sec)
- Versatile mounting options in square or rectangular configuration with modular construction
- Plug-in sensor
- Superb false immunity with the latest sensor technology
- Broader ranges for operating temperature (-4ºF to 158ºF) and humidity (0% to 95% non-condensing)
- Patented sampling tube installs from front or back of the detector with no tools required
- A cover tamperture to indicate a trouble condition for removed or improperly installed sensor cover
- Increased wiring space with a newly added 3/4 inch conduit knockout
- Improved LED status
- 24 V DC
- Backward compatibility with existing Innovair products, inclremote accessories
System Sensor Dnre Smoke Detector
- Photoelectric, integrated low-flow technology
- Air velocity rating from 0.5m/s to 20.32m/sec
- Versatile mounting options: square or rectangular configuration
- Broad ranges for operating temperature −20°C to 70°C and humidity (0% to 95% non-condensing)
- Patented sampling tube installs from front or back of the detector with no tools required
- New Cover tamper signal
- Increased wiring space with a newly added 20mm conduit knockout
- Available space within housing to accommodate mounting of relay module
- Clear cover for convenient visual inspection
BEAMLRK System Sensor Long Range Kit
The BEAMLRK allows reflected beam detectors to be installed at separations between 230 and 328 feet (70 to 100 meters).
B401 System Sensor Plug-In Detector Base
Specifications
- Base Diameter: 10.2 cm (4.0 inches)
- Base Height: 2.0 cm (0.8 inches)
- Weight: 152 g (0.34 lb.)
- Mounting: 50 mm box 60 mm box Operating
- Temperature Range: –10° to +60°C (14° to 140°F) — European Installation 0° to 49°C (32° to 120°F) — US/Australian Installation Operating Humidity
- Range: 10% to 93% Relative Humidity
EC01003 System Sensor Conventional Optical Smoke Detector
-
Conventional optical smoke detector, automatic drift compensation, voltage 8-30VDC/ current 0,05mA quiescent and 80mA in alarm, IP43 when installed on WB-1 shroud, -30° to 70°C, certificate 0832-CPD-0064
RA100Z System Sensor Remote Annunciator
RA100Z remote annunciator is designed for both conventional and intelligent applications.
ECO1002 System Sensor Conventional Multi-Sensor Detector – Smoke & Heat
- Low profile design
- Low current draw
- Automatic drift compensation
- Operates on 12 and 24VDC Systems
- Remote alarm test feature
- Easy Maintenance
- Range of detector bases available
- Remote LED Option
- Approved to EN54 – 7:2000 (Amendment 1)
- EN54 – 5:2000 (Amendment 1) Class A1R; CEA 4021
System Sensor Metal SaMPling Tube, 8 Ft. To 12 Ft. Width
Duct smoke detector accessories add functionality to the duct smoke detection system by allowing quick, convenient inspections at eye level and effective audible and visible notification options.
BEAMMMK System Sensor Mounting Kit
- The BEAMMMK allows reflected beam detectors and reflectors to be mounted to either a vertical wall or the ceiling. The kit allows for additional alignment range in cases where the detector and reflector cannot be mounted within 10 degree of each other. The kit includes the hardware necessary to mount either a single transmitter/receiver unit or a single reflector. (To mount the transmitter/ receiver the surface mount kit, BEAMSMK, must also be used). If the transmitter/receiver and the reflector require additional alignment range two kits are required.
CO1224TR System Sensor Carbon Monoxide Detector
- A 10-year end-of-life timer
- RealTest® enables a functional test using canned CO
- A code-required trouble relay
- Wiring supervision with SEMS terminals
- 12/24 VDC
- A low current draw of 20 mA in standby and 40 mA in alarm
- Versatile mounting for wall and ceiling
- Accurate and reliable electrochemical sensing technology
- Optional CO-PLATE CO Detector Replacement Plate to upgrade previously installed competitor detectors to the CO1224T or CO1224A.
- CO1224T tested up to 12,000 feet above sea level
System Sensor D2 Duct Smoke Detector, 2-WIRe, Photoelectric
- Photoelectric, integrated low-flow technology
- Air velocity rating from 100 ft/min to 4,000 ft/min (0.5 m/s to 20.32 m/sec)
- Versatile mounting options in square or rectangular configuration with modular construction
- Plug-in sensor
- Superb false immunity with the latest sensor technology
- Broader ranges for operating temperature (-4ºF to 158ºF) and humidity (0% to 95% non-condensing)
- Patented sampling tube installs from front or back of the detector with no tools required
- A cover tamperture to indicate a trouble condition for removed or improperly installed sensor cover
- Increased wiring space with a newly added 3/4 inch conduit knockout
- Improved LED status
- 24 V DC
- Backward compatibility with existing Innovair products, inclremote accessories
System Sensor Dnre Smoke Detector
- Photoelectric, integrated low-flow technology
- Air velocity rating from 0.5m/s to 20.32m/sec
- Versatile mounting options: square or rectangular configuration
- Broad ranges for operating temperature −20°C to 70°C and humidity (0% to 95% non-condensing)
- Patented sampling tube installs from front or back of the detector with no tools required
- New Cover tamper signal
- Increased wiring space with a newly added 20mm conduit knockout
- Available space within housing to accommodate mounting of relay module
- Clear cover for convenient visual inspection
BEAMLRK System Sensor Long Range Kit
The BEAMLRK allows reflected beam detectors to be installed at separations between 230 and 328 feet (70 to 100 meters).
