$15.75 + VAT
MCP1A-R470FG-01 Honeywell Conventional Flush Call Point Notifier
SKU: MCP1A-R470FG-01Notifier MCP1A-R470FG-01 Conventional Flush Call Point with 470 Ohm Resistor
The MCP1A-R470 ranges are manual call points, both with a 470 Ohm resistor and Normally Open contact, complete with glass. The MCP1A-R470FG-01 is designed for semi flush mounting and the MCP1A-R470SG-01 is designed for surface mounting. The call points are designed to provide a manual alarm interface to non-addressable fire alarm control panels. MCP1A-R470FG-01 & MCP1A-R470SG-01 call points are supplied in the standard red colour.
$18.53 + VAT
EC01005 Honeywell TeMPerature Heat Detector
SKU: EC01005- Conventional ROR temperature Detector
$27.78 + VAT
HD44IPX Honeywell Security Fixed Mini Dome IP Camera
SKU: HD44IPX- Make: Honeywell Security
- Model code: HD44IPX
- Chip Inch Size: 1/4 inch
- Colour Type: Colour / Monochrome
- HD: Yes
$32.41 + VAT
CWSO-RR-S1 Honeywell Sounder, Red
SKU: CWSO-RR-S1The acoustic alarm signaling device is EN 54-3 compliant, in red housing, and offers a selection of 32 signal tones including the DIN tone and other country-specific tones. All tones comply with EN 54-3. Configuration takes place via a 6-pin DIP switch. Up to two different signal tones may be activated. Signaling device with flat base, suitable for wall and ceiling mounting.
$264.83 + VAT
KB-C70PT Honeywell 70W Mixer Power Amp With Tuner
SKU: KB-C130PT-1-1Features:
- 3 microphones and 2 auxiliary inputs
- 1 line output
- 100V, 70V and 4-16 Ohms transformer-isolated speaker outputs
- Automatic mute function for paging and announcements
- Individual input gain controls with master volume control
- Bass and treble tone controls
- LED level meter
- SpeakerĀ output short circuit protection
$1,111.16 + VAT
X-DA4060 Honeywell High Efficiency Power Amplifier
SKU: 1013704033Signal, Dual and Four channel high efficiency Class-D amplifiers for public address
Automatic protection
Fault detection
Effective ventilation using forced air cooling fan
CE compliant
$1,453.77 + VAT
X-DA4125EN Honeywell High Efficiency Power Amplifier
SKU: 1013704035- X-DA4125EN is the Class-D amplifier and it is lighter, more stable, and high efficiency.The audio transmission is completely digitalized which makes it free from interference and easy to be controlled. It also has 24 VDC backup power supply conforming to international voice alarm standard which is the perfect choice for safety required applications.
$1,527.84 + VAT
X-DA2250 Honeywell High Efficiency Power Amplifier
SKU: 1013704001
$1,625.07 + VAT
X-DA4125 Honeywell Class D Digital Power Amplifier
SKU: 1013704034KEY FEATURES:
– Four channels 125W efficiency Class-D amplifier
– Automatic protection
– Fault dectection
– Effective ventilation using forced air cooling fan
– CE Complied
– EN Version: With 24VDC backup power supply

MCP1A-R470FG-01 Honeywell Conventional Flush Call Point Notifier
Notifier MCP1A-R470FG-01 Conventional Flush Call Point with 470 Ohm Resistor
The MCP1A-R470 ranges are manual call points, both with a 470 Ohm resistor and Normally Open contact, complete with glass. The MCP1A-R470FG-01 is designed for semi flush mounting and the MCP1A-R470SG-01 is designed for surface mounting. The call points are designed to provide a manual alarm interface to non-addressable fire alarm control panels. MCP1A-R470FG-01 & MCP1A-R470SG-01 call points are supplied in the standard red colour.


HD44IPX Honeywell Security Fixed Mini Dome IP Camera
- Make: Honeywell Security
- Model code: HD44IPX
- Chip Inch Size: 1/4 inch
- Colour Type: Colour / Monochrome
- HD: Yes

CWSO-RR-S1 Honeywell Sounder, Red
The acoustic alarm signaling device is EN 54-3 compliant, in red housing, and offers a selection of 32 signal tones including the DIN tone and other country-specific tones. All tones comply with EN 54-3. Configuration takes place via a 6-pin DIP switch. Up to two different signal tones may be activated. Signaling device with flat base, suitable for wall and ceiling mounting.

KB-C70PT Honeywell 70W Mixer Power Amp With Tuner
Features:
- 3 microphones and 2 auxiliary inputs
- 1 line output
- 100V, 70V and 4-16 Ohms transformer-isolated speaker outputs
- Automatic mute function for paging and announcements
- Individual input gain controls with master volume control
- Bass and treble tone controls
- LED level meter
- SpeakerĀ output short circuit protection

X-DA4060 Honeywell High Efficiency Power Amplifier
Signal, Dual and Four channel high efficiency Class-D amplifiers for public address
Automatic protection
Fault detection
Effective ventilation using forced air cooling fan
CE compliant

X-DA4125EN Honeywell High Efficiency Power Amplifier
- X-DA4125EN is the Class-D amplifier and it is lighter, more stable, and high efficiency.The audio transmission is completely digitalized which makes it free from interference and easy to be controlled. It also has 24 VDC backup power supply conforming to international voice alarm standard which is the perfect choice for safety required applications.

X-DA2250 Honeywell High Efficiency Power Amplifier

X-DA4125 Honeywell Class D Digital Power Amplifier
KEY FEATURES:
– Four channels 125W efficiency Class-D amplifier
– Automatic protection
– Fault dectection
– Effective ventilation using forced air cooling fan
– CE Complied
– EN Version: With 24VDC backup power supply

MCP1A-R470FG-01 Honeywell Conventional Flush Call Point Notifier
Notifier MCP1A-R470FG-01 Conventional Flush Call Point with 470 Ohm Resistor
The MCP1A-R470 ranges are manual call points, both with a 470 Ohm resistor and Normally Open contact, complete with glass. The MCP1A-R470FG-01 is designed for semi flush mounting and the MCP1A-R470SG-01 is designed for surface mounting. The call points are designed to provide a manual alarm interface to non-addressable fire alarm control panels. MCP1A-R470FG-01 & MCP1A-R470SG-01 call points are supplied in the standard red colour.


HD44IPX Honeywell Security Fixed Mini Dome IP Camera
- Make: Honeywell Security
- Model code: HD44IPX
- Chip Inch Size: 1/4 inch
- Colour Type: Colour / Monochrome
- HD: Yes

CWSO-RR-S1 Honeywell Sounder, Red
The acoustic alarm signaling device is EN 54-3 compliant, in red housing, and offers a selection of 32 signal tones including the DIN tone and other country-specific tones. All tones comply with EN 54-3. Configuration takes place via a 6-pin DIP switch. Up to two different signal tones may be activated. Signaling device with flat base, suitable for wall and ceiling mounting.

KB-C70PT Honeywell 70W Mixer Power Amp With Tuner
Features:
- 3 microphones and 2 auxiliary inputs
- 1 line output
- 100V, 70V and 4-16 Ohms transformer-isolated speaker outputs
- Automatic mute function for paging and announcements
- Individual input gain controls with master volume control
- Bass and treble tone controls
- LED level meter
- SpeakerĀ output short circuit protection

X-DA4060 Honeywell High Efficiency Power Amplifier
Signal, Dual and Four channel high efficiency Class-D amplifiers for public address
Automatic protection
Fault detection
Effective ventilation using forced air cooling fan
CE compliant

X-DA4125EN Honeywell High Efficiency Power Amplifier
- X-DA4125EN is the Class-D amplifier and it is lighter, more stable, and high efficiency.The audio transmission is completely digitalized which makes it free from interference and easy to be controlled. It also has 24 VDC backup power supply conforming to international voice alarm standard which is the perfect choice for safety required applications.

X-DA2250 Honeywell High Efficiency Power Amplifier

X-DA4125 Honeywell Class D Digital Power Amplifier
KEY FEATURES:
– Four channels 125W efficiency Class-D amplifier
– Automatic protection
– Fault dectection
– Effective ventilation using forced air cooling fan
– CE Complied
– EN Version: With 24VDC backup power supply

MCP1A-R470FG-01 Honeywell Conventional Flush Call Point Notifier
Notifier MCP1A-R470FG-01 Conventional Flush Call Point with 470 Ohm Resistor
The MCP1A-R470 ranges are manual call points, both with a 470 Ohm resistor and Normally Open contact, complete with glass. The MCP1A-R470FG-01 is designed for semi flush mounting and the MCP1A-R470SG-01 is designed for surface mounting. The call points are designed to provide a manual alarm interface to non-addressable fire alarm control panels. MCP1A-R470FG-01 & MCP1A-R470SG-01 call points are supplied in the standard red colour.


HD44IPX Honeywell Security Fixed Mini Dome IP Camera
- Make: Honeywell Security
- Model code: HD44IPX
- Chip Inch Size: 1/4 inch
- Colour Type: Colour / Monochrome
- HD: Yes

CWSO-RR-S1 Honeywell Sounder, Red
The acoustic alarm signaling device is EN 54-3 compliant, in red housing, and offers a selection of 32 signal tones including the DIN tone and other country-specific tones. All tones comply with EN 54-3. Configuration takes place via a 6-pin DIP switch. Up to two different signal tones may be activated. Signaling device with flat base, suitable for wall and ceiling mounting.

KB-C70PT Honeywell 70W Mixer Power Amp With Tuner
Features:
- 3 microphones and 2 auxiliary inputs
- 1 line output
- 100V, 70V and 4-16 Ohms transformer-isolated speaker outputs
- Automatic mute function for paging and announcements
- Individual input gain controls with master volume control
- Bass and treble tone controls
- LED level meter
- SpeakerĀ output short circuit protection

X-DA4060 Honeywell High Efficiency Power Amplifier
Signal, Dual and Four channel high efficiency Class-D amplifiers for public address
Automatic protection
Fault detection
Effective ventilation using forced air cooling fan
CE compliant

X-DA4125EN Honeywell High Efficiency Power Amplifier
- X-DA4125EN is the Class-D amplifier and it is lighter, more stable, and high efficiency.The audio transmission is completely digitalized which makes it free from interference and easy to be controlled. It also has 24 VDC backup power supply conforming to international voice alarm standard which is the perfect choice for safety required applications.

X-DA2250 Honeywell High Efficiency Power Amplifier

X-DA4125 Honeywell Class D Digital Power Amplifier
KEY FEATURES:
– Four channels 125W efficiency Class-D amplifier
– Automatic protection
– Fault dectection
– Effective ventilation using forced air cooling fan
– CE Complied
– EN Version: With 24VDC backup power supply
